A few worn areas
Spot repointing of the affected joints
Match the color to the rest of the chimney.
Chimney Tuckpointing in Spring Hill, FL
Fresh mortar joints, matched to the brick, before water gets in.
- Available for same-day service
- Fully licensed and insured
- Family owned and run
- Locally owned and operated
Request a Free Inspection
Request Received
Thanks, your request is with us. Expect a call from our Spring Hill family to book the free inspection.
Quicker by phone? Call (352) 663-0381
10% Off Work Booked in the 72 Hours After Your Inspection
Book tuckpointing within 72 hours of your free inspection and take 10% off.
What You Can Count On
Tuckpointing is the job of grinding out worn mortar joints and refilling them with fresh mortar. Chimney tuckpointing in Spring Hill stops water from soaking into the brick through sandy, recessed joints, and the new mortar is matched to the old in strength and color, because mortar harder than the brick can crack it.
Why Chimney Mortar Wears Out
Mortar is softer than brick on purpose. It takes the movement of the chimney as it heats and cools, and it erodes slowly in the rain so the brick does not have to. After enough years, the joints recess and loosen, and water that once ran off the face soaks into the wall.
Chimney mortar repair is easier and far less disruptive than replacing brick, which is why catching worn joints early matters. A chimney mortar joint repair done before the brick starts to spall keeps the original brick in place.
How Repointing Chimney Joints Works
Repointing chimney joints starts with grinding or raking out the old mortar to a sound depth, usually about twice the joint's width. The joints are cleaned and dampened, then fresh mortar is packed in layers and tooled to match the profile of the old joints so water runs off.
Chimney repointing and tuckpointing chimney joints are the same job in everyday use. Strictly, tuckpointing adds a fine line of contrasting mortar for appearance; on most chimneys here the work is plain repointing with one matched color.
Matching the Mortar
The mix matters more than the color. Mortar much harder than the brick forces the brick to take the movement, and the brick face cracks. We match the strength of the new mortar to the brick and the original mix, and the color to what is already on the chimney, so the repair is sound and hard to spot.
Problems We Find and Fix
Repair Options
Parts and Materials
Request Your Free Spring Hill Inspection
Leave your details and we will call back to pick a time that suits you.
- Free inspection and a written estimate
- Same-day service available
- Family owned and run in Spring Hill
Request Received
Thanks, your request is with us. Expect a call from our Spring Hill family to book the free inspection.
What Affects the Price
Signs It Is Time
Mortar joints are the part of a brick chimney meant to wear out first. When they turn sandy and recess, rain soaks into the wall instead of running off. Our crew grinds out the worn joints to sound mortar and packs in a fresh mix matched to the old in strength and color, so the brick is protected and the repair blends in.
Questions and Answers
What is chimney tuckpointing?
Chimney tuckpointing means grinding out worn mortar joints and filling them with fresh mortar. It keeps water from soaking into the brick through sandy, recessed joints, and in everyday use it is the same job as repointing. Strictly, tuckpointing adds a thin contrasting line for looks. On most chimneys the work is plain repointing in one matched color.
How do I know if my chimney needs tuckpointing?
Joints that sit behind the brick face, crumble when scratched or show gaps are due for repointing. Water stains or flaking brick below worn joints mean the water is already getting in, and a close look from the roof shows how deep the wear goes.
What mortar is used for chimney repointing?
Chimney repointing uses a masonry mortar matched to the strength of the brick, often a Type N mix for softer brick. Mortar much harder than the brick can crack the brick face as the chimney moves. The color is matched to the existing joints.
Can you caulk chimney mortar joints?
Caulk is not a substitute for mortar in chimney joints. It seals water in as well as out, peels in the sun and makes proper repointing harder later. Worn joints should be ground out and repointed with mortar, and sealant kept for flashing joints where metal meets masonry.
Related Services
Proudly American
Run by a Spring Hill family: experienced hands, a written estimate before work starts and a workmanship warranty on our repairs.
Equipment Brands We Install and Service
Renew the Joints, Save the Brick
Matched mortar, tooled to shed rain.