Skip to content

Proudly American · Family owned and run in Spring Hill

(352) 663-0381

Chimney Damper Repair and Replacement in Spring Hill, FL

A damper that opens easily and closes tight.

  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
  • Locally owned and operated

Request a Free Inspection

Quicker by phone? Call (352) 663-0381

Same-day service available, call now

(352) 663-0381 Get a Free Inspection

10% Off Work Booked in the 72 Hours After Your Inspection

Book damper work within 72 hours of the free inspection and take 10% off.

What You Can Count On

Damper replacement fits a new plate, frame or whole damper above the firebox when the old one is rusted, warped or stuck. Chimney damper repair in Spring Hill can also fix a broken handle or a loose frame. Where the throat is badly corroded, a top sealing damper on the flue may replace it.

  • Family owned and run

    When a new handle or a good cleaning will fix the damper, that is what we tell you.

  • Upfront, honest pricing

    Repair and replacement are quoted side by side.

  • Workmanship warranty

    A damper we repair or replace is covered by our workmanship warranty.

What the Damper Does

The throat damper sits at the top of the firebox, under the smoke chamber. Open, it lets smoke rise; closed, it keeps cooled indoor air in and humid outdoor air, rain and insects out. In a Florida home where the fireplace is cold most of the year, a damper that seals matters more than people expect.

Damper repair is needed when the plate rusts, warps or jams, or the handle and pivot wear out. Water coming down an uncapped flue is the usual cause of rust.

Fireplace Damper Repair or Replacement

Fireplace damper repair frees a stuck plate, replaces a broken handle or pivot, and cleans the frame so the plate seals. Fireplace damper replacement swaps the plate or the whole assembly for a new one sized to the throat. Throat damper replacement in masonry sometimes means cutting the old frame out of the brick.

When the throat is too corroded to hold a new damper, a top sealing damper on the flue does the job instead. Fireplace damper installation of either kind ends with a test that it opens fully and closes tight.

Problems We Find and Fix

Stuck damper
Rust or debris jams the plate. We free and repair it, or replace it.
Broken handle
The control has snapped or slipped. We replace the handle and linkage.
Warped plate
Heat has bent it so it will not seal. A new plate or damper fixes it.

Repair Options

Broken handle or loose pivot

Repair the handle and linkage

Clean rust from the frame.

Rusted or warped throat

Replace the damper or install a top damper

Cap the flue to stop the rust coming back.

Parts and Materials

Replacement damper
Cast iron or steel, sized to the throat.
Top sealing damper
For throats too corroded for a new plate.

Request Your Free Spring Hill Inspection

Leave your details and we will call back to pick a time that suits you.

(352) 663-0381
  • Free inspection and a written estimate
  • Same-day service available
  • Family owned and run in Spring Hill

Tell us what the chimney or fireplace is doing and we will phone to arrange the free inspection.

What Affects the Price

Repair or replace
A handle repair is far smaller than a new damper.
Throat condition
A corroded frame may call for a top damper.

Signs It Is Time

The damper is the metal plate just above the firebox that opens for a fire and closes to keep air and weather out. Rust, warping and broken handles leave it stuck open or closed. Our crew repairs the handle and frame, replaces the plate, or fits a new damper so it works the way it should.

  • A damper that will not open or close
  • A handle that spins or has broken off
  • Light or drafts showing through a closed damper
  • Rust flakes on the firebox floor

Questions and Answers

What is a fireplace damper?
A fireplace damper is the metal plate above the firebox that opens for a fire and closes when the fireplace is cold. A handle or lever inside the fireplace works it. When it rusts or warps, air and moisture leak through even with it shut.
What is the difference between a damper and a flue?
Think of the flue as the chimney's smoke passage and the damper as its door. The door usually sits at the bottom, just above the firebox, though a top sealing damper puts it on top of the chimney instead, where it also keeps out rain.
Can a rusted chimney damper be repaired?
A rusted damper can sometimes be freed, cleaned and fitted with a new handle. If the plate is warped or the frame is rusted through, it is replaced, or a top sealing damper is fitted on the flue instead. A cap on the flue stops the water that caused the rust. Without the cap, a new damper rusts the same way.
When should I close the fireplace damper?
Close the damper only once the fire is out and the ashes are cold. Closing it over embers pushes smoke back into the room, which is why the damper stays open until the firebox is completely cool. The rest of the year, keep it shut to hold cooled air in and keep humid air and insects out.

Proudly American

Run by a Spring Hill family: experienced hands, a written estimate before work starts and a workmanship warranty on our repairs.

Call Now (352) 663-0381

Equipment Brands We Install and Service

RutlandCopperfield Chimney SupplyHeatilatorHeat & GloDuraVentOlympia Chimney and Venting

Get a Damper That Seals

Repaired, replaced or moved to the top of the flue.

Call Now (352) 663-0381