Skip to content

Proudly American · Family owned and run in Spring Hill

(352) 663-0381

Chimney Waterproofing in Spring Hill, FL

Brick that sheds rain instead of soaking it up.

  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
  • Locally owned and operated

Request a Free Inspection

Quicker by phone? Call (352) 663-0381

Same-day service available, call now

(352) 663-0381 Get a Free Inspection

10% Off Work Booked in the 72 Hours After Your Inspection

Book waterproofing within 72 hours of the free inspection for 10% off.

Why Homeowners Choose Our Crew

Waterproofing a chimney means applying a breathable water repellent to the brick or block so rain beads off instead of soaking in. Chimney waterproofing in Spring Hill works best after cracks, joints and the crown are repaired, and it must let vapor out, so paints and plastic sealers are the wrong choice.

  • Family owned and run

    Repairs come before sealer, so the treatment has sound masonry to protect.

  • Upfront, honest pricing

    Repairs and waterproofing are listed separately in the estimate.

  • Workmanship warranty

    Repairs made before sealing are covered by our workmanship warranty.

Why Masonry Needs Help in Florida Rain

A brick chimney soaks up water during every long rain. In mild weather it dries out again, but Florida's summer brings day after day of storms, and wind-driven rain drives water deep into the joints. Over time that water carries salts to the surface, softens mortar and pops the faces off brick.

Chimney waterproofing does not make masonry plastic. A good water repellent soaks into the brick and mortar and lines the pores so liquid water beads off, while water vapor inside the wall can still escape. That breathability is what separates waterproof chimney work from simply painting it.

Choosing a Chimney Sealer

Not every chimney sealer belongs on a chimney. Paints, acrylic coatings and plastic sealers form a film that traps moisture behind it, and the trapped water pushes the coating and the brick face off from the inside. A breathable chimney water repellent made for masonry is the right product for brick, block and stucco.

Brick chimney waterproofing and chimney sealing on stucco use different products, and the label tells you which surfaces each suits. We match the repellent to the masonry and follow the maker's application and drying instructions.

Repairs First, Then Repellent

A repellent does not fill cracks or open joints, and it cannot stop water coming in through a missing cap, a cracked crown or loose flashing. Our chimney waterproofing service starts with those repairs, so the treatment goes onto sound masonry and the chimney is protected from top to bottom.

Once applied, the repellent wears slowly in the sun and rain. A look at the chimney every year shows when the brick starts to soak water again and a fresh coat is due.

Questions and Answers

Should chimney bricks be sealed?
Chimney brick benefits from a breathable water repellent, not a paint or film-forming sealer. The right product lets rain bead off while trapped vapor escapes. Sealing with the wrong coating traps moisture and can make the brick face flake off.
What is the best way to waterproof a chimney?
Repair the chimney first: cracked crown, missing cap, worn mortar joints and loose flashing. Then apply a breathable masonry water repellent to clean, dry brick or stucco, following the maker's instructions. A repellent over sound masonry protects it; over damage, it only hides the leak.
Can you paint a brick chimney to waterproof it?
Paint is a poor way to waterproof brick. Most paints form a film that traps moisture inside the masonry, and the trapped water blisters the paint and damages the brick face. A clear, breathable water repellent does the job without sealing water in.
How often does a chimney need waterproofing?
A quality water repellent lasts several years, depending on sun, rain and the masonry. When the brick starts to darken and stay wet after storms again, a new coat is due. A yearly look at the chimney tells you when.
Does waterproofing stop a chimney leak?
Waterproofing reduces the water that soaks through brick and mortar. It will not stop a leak from a missing cap, a cracked crown or failed flashing. Those need their own repairs first. Applied after them, a repellent closes the last path water takes through the masonry.
Is chimney waterproofing worth it in Florida?
Florida's long rainy season and wind-driven storms soak masonry more than gentle rain does, so a breathable repellent pays off on brick and block chimneys. It is worth doing once the crown, cap, joints and flashing are sound. Brick that sheds water keeps its face and its mortar longer.

What the Written Estimate Covers

  1. Repairs needed before the repellent goes on
  2. The masonry type and the repellent that suits it
  3. Surfaces to treat and areas to protect
  4. Cap, crown and flashing checked with it

Repair Options

Sound brick that soaks up rain

Apply a breathable water repellent

Look again each year for when it wears.

Cracks, open joints or a cracked crown

Repair first, then waterproof

Never seal over damage that still lets water in.

Request Your Free Spring Hill Inspection

Leave your details and we will call back to pick a time that suits you.

(352) 663-0381
  • Free inspection and a written estimate
  • Same-day service available
  • Family owned and run in Spring Hill

Tell us what the chimney or fireplace is doing and we will phone to arrange the free inspection.

Signs It Is Time

Brick and mortar drink water, and a chimney stands in every storm with no roof over it. Waterproofing with a breathable repellent lets the masonry shed rain while still letting trapped moisture dry out. Our crew repairs cracks and joints first, then applies the repellent so it protects sound masonry rather than sealing in a problem.

  • Brick that darkens and stays wet long after rain
  • White powder staining on the outside brick
  • Flaking brick faces near the top of the chimney
  • Water in the firebox after storms with no cap problem

How a Visit Works

  1. Check the masonry

    Cracks, joints, crown, cap and flashing first.

  2. Repair

    Joints repointed and cracks patched where needed.

  3. Clean and dry

    The surface prepared for the repellent.

  4. Apply

    A breathable repellent, to the maker's instructions.

Problems We Find and Fix

Saturated brick
Brick that stays dark after rain is holding water. A repellent cuts how much it takes in.
Paint or sealer trapping moisture
Non-breathable coatings blister and peel. We use a vapor-permeable product.
Cracks under the treatment
Repellent does not fill cracks. We repoint and patch first.

Proudly American

Run by a Spring Hill family: experienced hands, a written estimate before work starts and a workmanship warranty on our repairs.

Call Now (352) 663-0381

Equipment Brands We Install and Service

RutlandCopperfield Chimney SupplyHeatilatorHeat & GloDuraVentOlympia Chimney and Venting

Help Your Chimney Shed the Rain

Repairs first, then a breathable repellent that lasts.

Call Now (352) 663-0381