Skip to content

Proudly American · Family owned and run in Spring Hill

(352) 663-0381

Electric Fireplace Repair in Spring Hill, FL

The heat, the glow and the controls working again.

  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
  • Locally owned and operated

Request a Free Inspection

Quicker by phone? Call (352) 663-0381

Same-day service available, call now

(352) 663-0381 Get a Free Inspection

10% Off Work Booked in the 72 Hours After Your Inspection

Book electric fireplace repair within 72 hours of your free inspection: 10% off.

What You Can Count On

Electric fireplace repair fixes units that will not heat, show no flame effect or ignore the remote. Our Spring Hill crew checks the usual causes: a tripped thermal cutoff, a failed heater element or fan, burned-out lights, or a faulty control board. A quick reset fixes some faults. Parts are ordered by the maker's model number.

  • Family owned and run

    Simple causes, such as a tripped breaker or a dead remote, are checked first.

  • Upfront, honest pricing

    Parts and labor are quoted before we order.

  • Workmanship warranty

    The part we fit is installed under our workmanship warranty.

How an Electric Fireplace Works

An electric fireplace has two separate systems: a flame effect made with lights, mirrors and sometimes a spinning rod, and a heater made of an element and a fan. A thermal cutoff shuts the heater off if it overheats. Because the two systems are separate, an electric fireplace heater repair is a different job from fixing the glow.

Electric fireplace service starts with the simple things: power at the outlet, a reset after a cutoff trip, and fresh batteries in the remote. If those do not solve it, we test the parts.

Common Repairs

Electric fireplace insert repair and wall unit repair cover the same parts: heater elements, fans, thermal switches, LED or bulb arrays, flame motors, control boards and remotes. Parts are ordered by the maker's model, and the unit is tested through its heat and flame settings afterwards.

A burning smell, sparks or a tripping breaker are reasons to unplug the unit and leave it off until it has been checked.

Problems We Find and Fix

No heat
A tripped cutoff, failed element or fan. We test each in turn.
No flame effect
Bulbs, LEDs or the motor have failed. We replace the part.
Unresponsive controls
A remote, receiver or board fault. We trace it.

Repair Options

One failed part

Replace that part

Test all settings afterwards.

Several failures on an old unit

Consider a new electric fireplace

Compare repair parts with a replacement.

Parts and Materials

Maker's parts
Elements, fans, LEDs, boards and remotes for the model.
Dedicated circuit
Advised where the unit shares a busy circuit.

Request Your Free Spring Hill Inspection

Leave your details and we will call back to pick a time that suits you.

(352) 663-0381
  • Free inspection and a written estimate
  • Same-day service available
  • Family owned and run in Spring Hill

Tell us what the chimney or fireplace is doing and we will phone to arrange the free inspection.

What Affects the Price

Which part failed
A remote is smaller than a control board.
Parts availability
Older models may be hard to source.

Signs It Is Time

Electric fireplaces are simple compared with wood or gas, but their heater, flame effect and controls still fail. A unit that glows but will not heat, a dead display or a remote that no longer responds usually comes down to one part. Our crew diagnoses the unit, orders the maker's part and fits it.

  • Flame effect works but no heat
  • Heat works but no flame effect
  • Remote or buttons do nothing
  • A burning smell or tripping breaker

Questions and Answers

Why is my electric fireplace not heating?
An electric fireplace that glows but blows cold usually has a tripped thermal cutoff, a failed heater element or a stopped fan. First unplug it for a few minutes to reset the cutoff, then check the heat setting on the unit and the remote. If it still blows cold after that, the heater parts need testing.
Can electric fireplace inserts be repaired?
Yes. An electric insert uses the same parts as a wall unit, so a failed heater, fan, light strip or control board can be replaced. Parts are ordered by the maker's model number, and after the repair the insert is tested through every heat and flame setting before we leave.
Why does my electric fireplace smell like burning?
A light smell the first few times a unit heats is dust burning off the element. A strong or lasting burning smell, sparks or a tripped breaker point to a fault in the heater, fan or wiring. Unplug the unit and have it checked before using it again.
Do electric fireplaces wear out?
Electric fireplaces last many years, but heater fans, elements, light strips and remotes wear out with use. Most failures are a single part that can be replaced by following the maker's instructions. Very old units with hard-to-find parts may be worth replacing instead, which we check before ordering anything.

Proudly American

Run by a Spring Hill family: experienced hands, a written estimate before work starts and a workmanship warranty on our repairs.

Call Now (352) 663-0381

Equipment Brands We Install and Service

RutlandCopperfield Chimney SupplyHeatilatorHeat & GloDuraVentOlympia Chimney and Venting

Get Your Electric Fireplace Working Again

Heat, glow and controls, repaired with the maker's parts.

Call Now (352) 663-0381